Controller & Monitoring
XBL07A Obstruction Light Monitoring Controller
Our latest innovation in aviation safety – the Obstruction Light Monitoring Controller. This state-of-the-art controller is…
SKU XBL07A
QCL-SFLS-LED Sequence Flash Light System
Input and Output Voltage: 220VAC, 50 Hz, three-wire, Voltage single-phase
Output Trigger Pulses: Time-synchronized with the 50Hz line
Downloads
- SKU
QCL910-RUNWAY-THRESHOLD-IDENTIFICATION-LIGHT- Category
- Elevated Approach Lighting
- Input and Output Voltage: 220VAC, 50 Hz, three-wire, Voltage single-phase
- Output Trigger Pulses: Time-synchronized with the 50Hz line
- Modes of Operation: Manual (local) control Or ALCMS control
- Enclosure: Outdoor, Rain tight
- Features on Control Cabinet: • The control mode of the sequence flashing light system can be switched between local control and tower control through the “Local/Remote” selector switch on the main control cabinet touch screen panel. • The color touch screen operation interface enables on/off of the sequential flashing lights, setting of the flash intensity levels, switching of the flashing frequencies, and display of various system status information, etc. • LED indicators on control panel for system monitoring • Service entrance switch disconnects incoming power to the control unit
- Lightning Protection: Rugged surge protection on all input and output electrical connections
- Quantity: One for each flash unit
- Input Voltage: 220 VAC
| Input and Output Voltage | 220VAC, 50 Hz, three-wire, Voltage single-phase |
|---|---|
| Output Trigger Pulses | Time-synchronized with the 50Hz line |
| Modes of Operation | Manual (local) control Or ALCMS control |
| Enclosure | Outdoor, Rain tight |
| Features on Control Cabinet | • The control mode of the sequence flashing light system can be switched between local control and tower control through the “Local/Remote” selector switch on the main control cabinet touch screen panel. • The color touch screen operation interface enables on/off of the sequential flashing lights, setting of the flash intensity levels, switching of the flashing frequencies, and display of various system status information, etc. • LED indicators on control panel for system monitoring • Service entrance switch disconnects incoming power to the control unit |
| Lightning Protection | Rugged surge protection on all input and output electrical connections |
| Quantity | One for each flash unit |
| Input Voltage | 220 VAC |
| Power cable | Polyvinyl chloride insulated sheathed control cable, three-wire |
| Communications cable | Rugged surge protection on all external wiring connections |
| Mounting | On a 2-in ch pole (elevated)or a 12-inch shallow base(inset). |
| Lighting Protection | Rugged surge protection on all input and output electrical connections |
| Lamp | LED |
| Lamp Life | Average 50.000 to 100.000 hours on high-intensity step |
| Level of protection | IP65(elevated), IP68(inset) |
| Brightness level | 3 levels: 1 50cd~450cd ， 800cd~2000cd ， 8 000cd~20000cd |
| Flash frequency | Twice/second or Once/second |
| Horizontal Light Beam | -15° ～+15° |
| Vertical Light Beam | 0 ° ～+10° |
Typically specified for Elevated Approach Lighting projects.
Common use cases include airfield papi lights, approach lighting, approach lighting series, approach runway lights, elevated approach light, elevated type.
Need Product Guidance?
Request pricing, lead times, technical compatibility guidance, and project support for this model.
Related Products
Controller & Monitoring
XBL05A Obstruction Light Monitoring Controller
The XBL05A is an obstruction lighting Control box designed for controlling and monitoring Altiglo…
SKU XBL05A
Low Intensity Series
WL90SE E27 Type Low Intensity Single Obstruction Light(Type A)
Altiglo WL90SE E27 type Low intensity obstruction light is the perfect choice for any…
SKU WL90SE
XBL01A Obstruction Light Monitoring Controller
Input voltage: 85-265VDC Output voltage: 24VDC Number of Light output: 9*contact relay for lights, power and photocell…
SKU XBL01A
Low Intensity Series
WL90D Low Intensity Dual Obstruction Light (Type A)
Product Name:Low Intensity LED Steady Type or Flashing Type(Type A) Input voltage:85-265VAC, 50/60 Hz;12VDC; 24VDC;30-60VDC; Effective Intensity: 10 Candela LED Lifespan:100,000 Hours Materials:Lens-PC; Body- Aluminum
SKU WL90D-LOW-INTENSITY-DUAL-OBSTRUCTION-LIGHT-TYPE-A
Transmission Line Warning
YZ07 Conductor Marking Light
Altiglo YZ07 Conductor marking light is an LED light that is specifically designed for…
SKU YZ07-CONDUCTOR-MARKING-LIGHT